Configurator MannTek Products

Insert Message
Date
Message
From
Priority
Done
Answer
Home
Select: Type of Coupling
SBC Breaking Bolt Type 'Industrial Version'

Installation between a hose assembly or loading arm and a fixed point, e.g. pipe system, rail tanker or road tanker connection.
Release by pull at any angle up to 90 degrees.

Safety Breakaway Coupling with integrated shut-off valves. Used to protect hose assemblies and loading arms against excessive loads, e.g. due to drive / pull away incidents or rapid removal of the mobile tanker in emergency situations.
Designed with breaking bolts; activation at a defined tensile (pulling) force on the transfer line being applied at an angle of up to 90 degrees.
Suitable for a wide range of products including petroleum based products, chemicals and foodstuffs.
Typical applications include container discharge, fuel bunkering truck-to-ship, ship-to-ship, terminal-to-ship, loading / unloading of tank trucks, rail tankers and ships.

Additional Info
SBC Breaking Bolt Type 'Marine Version'

Typically installed between two hose assemblies.
Release by axial pull only.

Safety Breakaway Coupling with integrated shut-off valves. Used to protect hose assemblies against excessive loads, e.g. due to pull away incidents or rapid removal of the vessel in emergency situations.
Typical applications are ship to rig and ship to ship media transfers.
Designed with breaking bolts; activation at a defined tensile (pulling) force on the transfer line being applied applied axially.
In comparison to the 'Industrial Version' the coupling offers an increased resistance to torsion and bending loads to prevent unwanted separation.

Suitable for a wide range of products including petroleum based products, chemicals and foodstuffs.
Typical applications include container discharge, fuel bunkering truck-to-ship, ship-to-ship, terminal-to-ship.

Additional Info
SBC-C Cable Release

Typically used when a tensile force on the transfer line is not allowed or very low separation forces are required.

Safety Breakaway Coupling with integrated shut-off valves. Used to protect hose assemblies against excessive loads. Special type, recommended in transfer systems with the combination of high operating pressure and weak piping structure.
Compared with standard Safety Break Couplings with breaking bolts SBC-C are designed with a clamp system and an external collar with an attached cable. The tensile force (pulling force) is not transmitted via the hose or loading arm, but by an integrated cable which is attached to a fixed point.
Release forces are almost independent from the internal pressure (operating pressure).
After the admitted travel limit of the cable is reached (angle up to 90 degrees), only a small pull is sufficient to actuate the separation.
Suitable for a wide range of products including petroleum based products, chemicals and foodstuffs.

Additional Info
Product GroupSafety Breakaway Couplings
Order No.Safety Breakaway Couplings
DescriptionSBC
Safety Breakaway Couplings with integrated shut-off valves to protect hose assemblies and loading arms against exces­sive loads. Suitable for all common liquid and gaseous media.
C O M P A R E
Your choice:
Choose additional options
or click here to go on.
Last Update: 16.05.2018